Electrolux 900xp Line E9STGLT01A Gas Solid Top on Gas Oven with 2 Burners
Electrolux (E9STGLT01A) High efficiency 5.5 kW central burner with flame failure device and protected pilot light. Large cooking surface with differentiated heating zones. Large flat cooking surface made in cast iron allows for the use of a number of various sized pots and pans, all easily moved across the surface without lifting. Oven chamber with 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans). Ribbed, cast-iron oven base plate. High efficiency flower flame burners with continuous power regulation and optimized combustion. Flame failure device as standard on burners to protect against accidental extinguishing. Exterior panels in stainless steel. Worktop in 20/10, stainless steel. Right angled side edges eliminate gaps and possible dirt traps between units.
Rent-Try-Buy® $104.33 +GST per week Based on 12 Month Contract, Conditions Apply
The center of the plate can reach a maximum temperature of 500 °C while decreasing outwards.
Central burner with optimized combustion, flame failure device and protected pilot light.
Temperature gradients to satisfy different cooking needs, provided over the whole plate thanks to the temperature fine-tuning by zone.
Various sizes of pans can be used at the same time due to large surface area with no intermediate sectors.
Pans can easily be moved from one area to another without lifting.
Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed cast iron base plate.
Oven thermostat adjustable from 120 °C to 280 °C.
The 6 kW and one 10 kW high efficiency flower flame burners are available in two different sizes to suit high performing cooking requirements of the most demanding customers: -60 mm burners with continuous power regulation from 1,5 to 6 kW -100 mm burners with continuous power regulation from 2.2 kW to 10 kW
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
All major compartments located in front of unit for ease of maintenance.
IPX5 water resistance certification.
The special design of the control knob system guarantees against water infiltration.
AISI 304 stainless steel worktop, 2mm thick.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.