Electrolux 900xp Line E9GCGH4CVM 4 Burner Gas Range 10 kW on Gas Oven
Electrolux (E9GCGH4CVM) High efficiency flower flame burners with continuous power regulation and optimized combustion. Flame failure device as standard on burners to protect against accidental extinguishing. Oven chamber with 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans). Ribbed, cast-iron oven base plate. Exterior panels of unit in stainless steel with Scotch Brite finish. Pan supports in heavy duty cast iron. Extra strength work top in heavy duty 2 mm stainless steel. Right-angled side edges to allow flush-fitting junction between units. To be installed on stainless steel feet with height adjustment up to 50 mm.
Rent-Try-Buy® $119.69 +GST per week Based on 12 Month Contract, Conditions Apply
Unit to be mounted on stainless steel feet with height adjustment up to 50 mm. Unit can be easily mounted on cantilever systems.
Four 10 kW high efficiency burners are equipped with continuous power regulation from 2.2 kW to 10 kW.
Gas appliance supplied for use with natural or LPG gas, conversion jets supplied as standard.
Large sized pan support in cast iron (stainless steel as option) with long center fins to allow the use of the largest down to the smallest pans.
Burners with optimized combustion.
Flame failure device on each burner protects against gas leakage when accidental extinguishing of the flame occurs.
Protected pilot light.
Base compartment consists of a gas heated standard oven with stainless steel burners and self stabilizing flame positioned beneath the base plate. Oven chamber to have 3 levels of runners to accomodate 2/1 GN shelves (2 steam pans) and ribbed cast iron base plate.
Oven thermostat adjustable from 120 °C to 280 °C.
40 mm thick oven door for heat insulation.
The special design of the control knob system guarantees against water infiltration.
IPX5 water protection.
Unit is 930 mm deep to give a larger working surface area.
All exterior panels in Stainless Steel with Scotch Brite finishing.
AISI 304 stainless steel worktop, 2mm thick.
Model has right-angled side edges to allow flush fitting joints between units, eliminating gaps and possible dirt traps.